Acrylic is optically very pure and beautiful with light. We have acrylic on stock in a thickness of 15mm in various colours which are perfect to be used for furniture.
Show cases of acrylic are lightweight, less breakable, optically more pure than glass (light transmission of 92%) and does not have green edges. Moreover, there is a lot of choice in colours!
Our optical pure acrylic tubes can be fabricated into reactors and machine caps. Acrylic is strong, opticully pure and UV-resistant.
Letters and figures can be easily laser cut by using an AutoCAD drawing.
PLEXIGLAS® and acrylic is the same. PLEXIGLAS® is the brand name of the transparent plastic acrylic, just like Perspex® for example. In the Netherlands, the term ‘plexiglas’ is so known that this became the product name of this plastic.
Primo® and Versato® are brand names of PyraSied Xtreme Acrylic. We use the brand name Primo® for extruded acrylic (XT). The brand name Versato® is used for all cast acrylics (GS).
Brand names such as SetaLetter®, Satinglas® and Setacryl® are official brand names of the material, supplied by our European suppliers. PyraSied is the official distributor for these brands.
GS (cast acrylic) is optically more pure but has a thickness tolerance *. XT (extruded acrylic) has hardly any thickness tolerance but is optically slightly less pure. However, the optical differences are barely perceptible, certainly not with smaller sheets.
For applications where the material is in a profile or when a flat surface is required, we recommend the use of extruded acrylic. Because XT acrylic is produced in large quantities, XT acrylic sheets are relatively slightly cheaper than cast GS acrylic sheets.
Do you want more choice of thicknesses, colours and surfaces? Then you can choose cast (GS) acrylic.
* a difference in thickness within a sheet. With cast acrylic, the standard for A-quality is +/- 0.4mm + 10% nominal thickness, so a 10mm sheet runs from 8.6 to 11.4mm. Within one sheet!
Acrylic has a very high light transmission and this is much higher than glass with 92%. In addition, it is 25 times stronger than glass and only half as heavy. Acrylic is also easy to work with and it will not shatter, which glass does. It is also very durable, it is resistant to all kinds of weather conditions and usually light and UV-resistant.
An advantage of glass over acrylic is the scratch resistance. The acrylic surface is softer and therefore scratches faster. With the right care, this can be minimized/repaired perfectly, while a scratch in glass can no longer be removed.
Acrylic is easy to fabricate. The fabrication possibilities are: Sawing, laser-cutting, milling, warm bending, gluing, drilling, faceting, polishing, sanding, and printing.
For business customers, it is possible to perform these fabrications by PyraSied. We deliver from our excellently equipped workshop – where a high-tech machine park and classic craftsmanship ensure optimal results, completely customized according to drawing or design.
Would you like more information about our fabrication possibilities? Please check our website under “Fabrications“. It is also possible to request a quote via this page.
Put a little water in a container and add a drop of dish soap. Do not use Glassex at all. We also sell VuPlex. We recommend using this cleaning agent. In addition to the safe cleaning of acrylic, it also serves as a protective coating, which means that acrylic does not become static. Another good alternative is Burnus antistatic cleaner.
PyraSied is happy to share the beauty of acrylic (PMMA) with you and the world! Acrylic, the transparent plastic that is usually referred to by the brand name Plexiglas®, is a particularly beautiful material, which is why we have many different variants standard in stock. What is so special about ‘normal’ clear acrylic? The beauty lies in that clarity because it is much clearer and stronger than glass. Acrylic has a very high light transmission of 92%, it is an optically pure material.
This purity is always reflected in the applications. This material is often used by the interior sector for decorative applications. In addition, the material is also often used technically by the industry for, for example, machine covers or reactors. View our reference projects to see examples of applications with our materials.
Acrylic is known for its excellent characteristics. This material is 25 times stronger than glass, UV-resistant, colourfast, and has a long lifespan. Acrylic remains beautiful for years with proper use. This type of plastic is fully recyclable after use into new acrylic sheets and is therefore good for the environment. We also offer acrylic made from recycled acrylic called Greencast® and Ecocrylic®. The light transmittance of acrylic is 92% and the fire class is E according to EN13501-1. Datasheets are available at www.pyrasied.com/downloads.
PyraSied is an acrylic specialist with the most extensive stock of acrylic sheets, tubes, and rods in Europe. This material is standard in stock in clear, transparent, translucent, satin, and opaque colours and special types such as mirror or metallic. We have this beautiful material available in various thicknesses from 0.5 to 100 mm thick. And the great thing is, we offer flexibility with this material. You can order almost all materials in our delivery program cut-to-size without a minimum purchase.
Acrylic is widely used but is mainly used in interior construction, stand- and decor construction, shop design, lighting, signing, and display construction. Do you want to be inspired with all the possibilities with acrylic? Please check our reference projects for various examples of applications with acrylic
Acrylic is very easy to fabricate. The fabrication possibilities are: cutting, milling, laser-cutting, oven bending, bonding, drilling, faceting, polishing, sanding and printing. Do you want more information about how to fabricate acrylic yourself? Take a look at our fabrications page. Here you can find tips and tricks about the fabrication possibilities of acrylic. These fabrications can be performed by PyraSied if desired. We deliver from our excellently equipped workshop – where high-tech machinery and traditional craftsmanship ensure optimum results, completely tailored to your drawing or design.
The transparent plastic acrylic (PMMA) is known under various well-known brand names such as PLEXIGLAS® and Perspex®. At PyraSied you can recognize this plastic by the following brand names: Astariglas®, Primo®, Versato®, SetaLetter®, Setacryl®, and Satinglas®.
Primo® and Versato® are PyraSied’s own brand names for extruded (Primo) or cast (Versato) acrylic.
More than 35 years of experience in performance plastics
We deliver quickly, cut-to-size and always from our own stock everywhere in Europe
We are plastic specialists and provide customized services for all, both serially tailored to your supply chain and one-offs
We develop new design and colour collections annually and guide customer-specific acrylic production for projects
De cookie-instellingen op deze website zijn ingesteld op 'toestaan cookies "om u de beste surfervaring mogelijk. Als u doorgaat met deze website te gebruiken zonder het wijzigen van uw cookie-instellingen of u klikt op "Accepteren" hieronder dan bent u akkoord met deze instellingen.